Selling Tips - EA014 Interactive whiteboard active speakers

Favourite Interactive whiteboard speakers in schools with USB hub

Features

Designed for the education market with steel grilles and secure wall fixings so children can't damage or knock it off the wall
The power handling is designed for a typical school classroom of about 10m wide and 6m deep giving a Sound Pressure Level of about 75dB C weighted at 6 metres
32 Watt (rms) amplifier 16 watts rms per channel
Audio Inputs for PC and DVD or VCR etc used as teaching aids
Includes a 4 port USB hub for whiteboard and other devices that need connection to a PC or laptop (easily connected and disconnected without fumbling behind equipment)
Provided with all cables including USB and speaker connections

Sell with these related products

The steel grilles and secure fixing brackets are not provided by many competitors but required by many schools
Two inputs for PC and DVD player etc convenient on front panel
3x USB inputs and 1x USB output connects a whiteboard and MP3 devices etc direct to the PC (without the need to rummage around behind the PC)
Volume control on faceplate for ease of use
Supplied with connecting cables
The design is registered in the EU Community Design Register affording some legal protection from cheap copies

Sound output designed specifically for the Classroom – audio quality output enhanced by wood speaker cabinet
USB inputs enable other devices such as Interactive whiteboard, Laptop, or MP3 players etc to be connected without accessing the rear of the PC
Easy to install with key hole fixing and individual screwed wall fixing to secure from accidental abuse
Supplied with cables and fixing screws to ease purchasing logistics

Colour	Grey Body
Output Power	16 Watts x 2
Drive Units	4" x 2 + 1"x1
Impedance	4 ohms
Frequency response	20Hz - 20 kHz
Separation	>35 dB
Signal/noise Ratio	>80d B
Input Sensitivity (10% THD)	<450 mV
Distortion THD	<0.2%
Sound Pressure Level at 6 metres	>75 dBA
Dimensions (mm)	610x135x98 mm
Power Supply	230 Volt

Active speaker
Passive speaker
1x USB-A connection at base for connection of interactive whiteboard
1x PC USB-B connection at base for PC connection
2x USB-A connections on front panel to connect audio devices etc to a PC through an internal USB2.0 hub
2x PC Audio connections with 3.5mm mini jack female sockets at base for PC and DVD audio input to the amplifier
1x RCA female output connector for passive speaker connection
1x 1.8 metre Mains power lead fitted with a figure 8 to moulded plug to BS 1363
1x 1.8 metre Mains power lead fitted with a figure 8 to moulded Europlug
user manual