Two-Way Stereo Design
A four-driver, 2.0-channel configuration—featuring 3.5-inch woofers and 1-inch silk-dome tweeters—designed for desktop audio playback.
30W RMS per Channel
Delivers 30W RMS per channel, suitable for use with computers, mobile phones, portable audio players, keyboards, and headphones. Supports wireless pairing via Bluetooth v5.4 (with AAC and SBC codec support) as well as wired connectivity.
Wide Frequency Range
Covers 68Hz to 22kHz, accurately reproducing low, mid, and high-frequency content for music and media. Housed in a wooden cabinet and powered by an AC 100–240V supply; available in orange, white, blue, black, and yellow.
|
Specification |
|
|
Amplifier Type |
Dual class D |
|
Output Power |
30 W RMS per channel, AES |
|
Drivers |
3.5" woofer, 1" silk dome tweeter |
|
Inputs |
1/8" /3.5mm stereo mini-jack, 1/4" / 6.35mm stereo jack, RCA, USB/Bluetooth |
|
Output |
RCA Sub-out |
|
Power Requirements |
100-240 V 50/60 Hz auto-switching |
|
Signal-to-Noise Ratio (SNR) |
>85 dB (typical A-weighted) |
|
Total Harmonic Distortion (THD) |
<0.05% at all power settings |
|
Channel Separation |
|
|
Frequency Response |
68 Hz - 22 kHz +2.0 dB |
|
Input Impedance |
10K ohms unbalanced |
|
Protection |
Output current limiting, thermal over-temperature, power on/off transient protection |
|
USB Connection |
Type-C USB Audio |
|
Operating Temperature |
0-50°C |
|
Input Bit Depth |
Up to 24 bits native |
|
Input Sample Rate |
Up to 48 kHz native |
|
Headphone Output Power |
155mW |
|
Bluetooth Version |
Bluetooth 5.4 |
|
Supported Codecs |
AAC, SBC |
|
Wireless Range |
Up to 100 ft (30 m) typical |
|
Input Bit Rate |
Determined by Bluetooth |
|
Dimensions (each) |
9.65" (H)x 5.51"(W)x6.89" (D) |
|
Weight (Left Speaker) |
2.26 Kg /4.98 Lbs |
|
Weight (Right Speaker） |
1.87 Kg/4.12 Lbs |
|
Shipping Weight |
5.9 Kg /13.01 Lbs per pair |
|
Shipping Dimensions |
12.6" (H) x 14.8" (W) x 10.24" (D) |
