Product SKU:

EAN:

Complete package of fixings, cable and supports for solar panel installation
Ask a question about this product
Description

Edis provides a complete service for Solar Panel installations including the fixings, accessories and wiring as a package designed to match the requirents of your energy project including the Solar Panels, inverters and batteries. 

 Tiled Roof Mounting Systems

 

EM1050004

 

Tile roof mounting system with a large range of brackets provides great flexibility especially for for residential properties. It uses aluminum alloy panel rail with stainless steel roof hooks, suitable for installing framed and frameless modules flush to the pitched the roof. Extruded aluminum rail with mounting slots, pre-assembled clamps and a variety of roof hooks ensures a quick and easy installation .

 

Specification :
Wind Speed:< 60m/s Snow load:1.4 KN/m2 Standard:AS1170.2;Degree:Parallel to the roof Arrangement:Vertical or Horizontal;Warranty:10 years.
installation manual :
1.Installing roof hook by tapping screws.

2.Installing rail by side of roof hook, hook’s hole can adjust the height of rail.

3.Two rails supported each panel , fix panels by mid clamp and end clamp kit.

 

Solar system support 19

 

Solar system support 20

 

Corrugated Steel Roof Mounting System

With variety of different roof brackets steel roof mounting system meet the needs of trapezoid/corrugated metal roof and standing seam roofing systems with or without penetrating on the roof itself.

Installation manual :

1.Fix L-feet by tapping screw, ensure waterproof by rubber plate.

2.Installing rail by side of L-feet, L-feet’s hole can adjust the height of rail.

3.Two rails supported each panel , fix panels by mid clamp and end clamp kit.

EM10505

 

EM1050004

 

Trapezoid roof bracket :

Material: Stainless steel +Tapping screw + Socket bolt kit
Finish :N/A
Remark :By short Tapping screw to fix bracket

 

 

Corrugated Steel Roof Brackets :

Material :Stainless steel + hanger bolt + Socket bolt kit

Finish;N/A

Remark ;Drilled into purlin of metal roof

EM10505

 

EM1050004

 

Seam Clamp Bracket :
Material Aluminum alloy + Socket bolt kit
Finish N/A
Remark Seam clamp

 

Ballast Mounting System (for 2 rows of panels)

Ground or Roof Mounted installation on a open conctrete roof ot field . Not only for residential but also widely used for commercial projects . Strong and secure structure, good appearance and low cost make this system popular.

Installation manual:
1.Install posts first , and then install main beam
and diagonal brace on 2 columns. 2.Install mounting rail upon main beam. 3.Install PV panels by mid clamp and end clamps.

EM10505

 

Project pictures : 

 

Solar system support 08

 

Triangular Wind Resistant Mounting System

Adjustable Triangle Solar Racking System is especially designed for easy installation of solar panel to tilt a certain angle with flat roof . The mounting system design provides a strong and sturdy support for solar modules , it can be a fixed angle or adjustable such as 10~15 degree 15~30 degree and 30~60 degree for your requirement . Using our innovatve Rail and pre-assembied components like tilt-in T module , clamp kit and highly pre-assembled tilt leg , This Metal Adjustable Tilt Solar Mounting makes the installation easy and quick to save your labor cost and time.

 

Solar system support 11

 

Solar system support 12

 

Asphalt Shingle Roof Mounting System

Asphalt shingle roof solar mounting system used for support solar panel on asphalt shingle roof without any degree. Just use simple tools will be fine to complete all accessories installation. Main parts we use are aluminum alloy 6063 material, surface treat will be anodizing. All bolts pre-assembled will be stainless steel SUS304 material. Tapping screw which need to be drilled into asphalt shingle roof by L-feet holes, so we use by carbon steel material with hot dip galvanized surface treatment. All mounting structure has 10- year warranty and 25-year service life.

 

Solar system support 13

 

 

Solar system support 14

 Project pictures

Solar system support 15

 

 Direct Ground Screw Fixing System

EM1050004

Ground Screw structure with features : convenient installation , low cost , suitable for large-scale photovoltaic power station . Ground Screw drilling into the earth , make sure connection is firm , construction is convenient , easy to install bracket foot. The main structure is HDG steel , beautiful appearance , strong structure and reliable.

 

Solar system support 16

 

Solar system support 18

 

Cable and Wiring

EM1050004

 

Connecting Cable
PVC connecting cable 4 mm2 for connection of solar panels to inverters

 

Connectors for connecting Solar Panels to inverters

EM10505

Solar system support 25

Solar Panel Wiring

 

©2022 Edis AV limited.